Directions for use
1. Ensure all surfaces are clean, dry ad grease-free. Remove all grit, oil, grease, detergents, flaking paint, any loose materials
and old sealant.
2. Cut off tip of nozzle and cartridge. Screw on nozzle to cartridge.
3. Fit into chalking gun, applyn surface in steady flow.
4. If required smooth and shape sealant with spatula dipped in mild detergent.
5. Remove excess uncured sealant with a mineral turpentine soaked cloth. Fully cured excess sealant an be removed by trimming with
a sharp knife.